Go to eNMR
2D J-resolved
(magnitude mode)
PRELIMINARY SET-UP
    • PARAMETER SET
    a 2D 1H-1H COSY-45 spectrum with rpar COSY45SW all , change the pulse program to jresqf that
    MODIFY SPECIFIC PARAMETERS

    In the F1 dimension, only 1H-1H coupling constants will be displayed. For this reason, a small sw is used in this dimension. First set nd0=2 and then define the spectral width in this dimension by typing 1 swh 40.

    On the other hand, the values of TD2 and TD1=NE are set, by default, to 1K and 128w, respectively. If spectral resolution must be modified use other values. Finally, set the number of scans as a function of the sample concentration (the minimum required is ns 4 and ds 2).

    ACQUISITION
    PROCESSING
    PLOT
    OBSERVATIONS
    OTHER RELATED VERSIONS