4.3 Cap removal

 

The rotor cap is easily removed with a dedicated cap removal tool (see figure 4.3). Screw the tool body loosely to the cap clamp. Insert the cap all the way into the teeth of the clamp. Screw the tool body snugly, but not too tight, onto the clamp. Insert the rotor into the barrel clamp and remove the cap by simultaneously rotating and pulling the barrel clamp. Unscrew the cap clamp and push the cap out with the push pin. Be careful not to damage the caps. (For more complete instructions please refer to the guidelines delivered with the cap removal tool).
 

Figure 4.3. Schematic drawing of the cap removal tool.